Авторизация
Забыли логин или пароль?
Мы в мессенджерах
Заправка лазерных картриджей у нашего партнёра:
+7(495) 755 70-48 Заказать заправку

Xerox Phaser 3010 коды ошибок

Код ошибки Сообщение принтера Возможная причина
010-397 Restart Printer Contact Support if Message Returns Fusing Failure Fusing temperature anomaly detected
016-315 Restart Printer Contact Support If Message Returns DRAM check failure DRAM check error occurred
016-317 Restart Printer Contact Support If Message Returns ROM content invalid Invalid ROM content detected.
016-501 Write Flash Error Contact Support If Message Returns Write Flash Error Can not update application code in FLASH
016-502 Write Flash Error Contact Support If Message Returns Write Flash Error Can not update parameters in FLASH
016-718 Memory Full Job Failure Press Ok Memory Over flow The current job exceeds memory capacity.
016-719 Decode Error Job Failure Press Stop to Cancel Decode error Decode error is detected.
016-720 PDL Request Data Violation Press Ok PDL Error The print data cannot be processed by PDL
016-744 Format Error Invalid Data Press Ok Download Format Error Invalid code to be downloaded.
016-745 Format Error Invalid Data Press Ok Download Format Error Invalid code to be downloaded.
016-749 PJL Request Data Violation Press Ok PJL Request Error Print data cannot be processed by PJL
024-340 Restart Printer Contact Support If Message Returns MCU Firmware Error
024-360 Restart Printer Contact Support If Message Returns MCU Firmware DownLoad Error
024-371 Restart Printer Contact Support If Message Returns MCU-ESS Communication Fail Communication fail between MCU and ESS
024-958 Paper Size Mismatch Load Paper then Press Ok XXXXX (or YYYYY) Paper Size Mismatch The size of paper in the Tray does not match the specified print size XXXXXX: Paper Size YYYYYY: Paper Type
024-963 No Paper Load Paper then Press Ok XXXXX (or YYYYY) No Paper/Jam Tray has run out of paper, or Regi sensor is not turned ON within the specified time.
041-340 Restart Printer Contact Support If Message Returns NVM (read/write error detected.
061-370 Restart Printer Contact Support If Message Returns LPH failure detected.
075-100 Paper Jam Jam at Feed Open Rear Cover and Remove Paper No Paper/Jam Tray is out of paper, or Regi sensor is not turned ON within the specified time.
075-921 Insert Output to Tray Press Ok to Continue Printing Insert Output to Tray The sheet on which to print an oddnumbered page has not been loaded in the Tray for manual duplex printing.
077-100 Paper Jam Jam at Feed Open Rear Cover and Remove Paper No Paper/Jam Tray is out of paper, or Regi sensor is not turned ON within the specified time.
077-104 Paper Jam Jam at Exit Open Rear Cover and Remove Paper Regi Jam The paper does not pass through the Regi Sensor on time.
077-106 Paper Jam Jam at Exit Open Rear Cover and Remove Paper No Paper/Jam Tray is out of paper, or Regi sensor is not turned ON within the specified time.
077-108 Paper Jam Jam at Exit Open Rear Cover and Remove Paper Exit Jam The paper does not pass through the Exit Sensor on time.
077-109 Paper Jam Jam at Exit Open Rear Cover and Remove Paper Exit Jam The paper does not pass through the Exit Sensor on time.
077-304 Close Rear Cover Rear Cover Open
077-900 Paper Jam at Exit Open Rear Cover and Remove Paper Paper Remains at Exit Paper remains in Exit Sensor.
077-901 Paper Jam at Exit Open Rear Cover and Remove Paper Paper Remain at Regi Sensor.
091-402 Restart Printer Contact Support If Message Returns Xerox Near Life
092-651 Restart Printer Contact Support If Message Returns CTD (ADC) sensor error
092-661 Restart Printer Contact Support If Message Returns Environment Sensor Error The Environment Sensor detected a temperature anomaly
093-426 Toner Cartridge is Close to Life Toner Cartridge Life Warning The Toner Cartridge is approaching the replacement time
093-926 CRUM ID Reset Black Cartridge K CRUM ID Error An unsupported Toner Cartridge is detected.
093-933 Replace the toner cartridge or check the cartridge is correctly set Toner Cartridge Life Over (K) The Toner Cartridge has reached the replacement time
093-974 Insert Print Cart Insert Toner Cartridge Toner Cartridge Detached The Toner Cartridge is not installed
116-314 Restart Printer Contact Support If Message Returns ESS Network MAC Checksum Error Checksum error in MAC address.
116-323 Restart Printer Contact Support If Message Returns Checksum error (Fax) Checksum error for Fax parameter is detected.
116-325 Restart Printer Contact Support If Message Returns Checksum error (Other)
116-326 Restart Printer Contact Support If Message Returns Checksum error for Scannr parameter is detected.
116-335 Restart Printer Contact Support If Message Return Checksum error (Network) Checksum error for Network parameter is detected.
116-355 Restart Printer Contact Support If Message Return ESS Network Fatal Error. Error during the onboard network check.

117-331

...

117-366

Restart Printer Contact Support If Message Return ESS-related error
124-333 Restart Printer Contact Support If Message Return ASIC Failure ASIC failure detected
191-310 Restart Printer Contact Support If Message Return XEROX Life Over The Printer has reached the replacement time

 

© 2012-2017 дизайн и вёрстка pivbul
никакие права не защищены и ничьи права не соблюдаются